
Scantronic 8 Zone End Station & 9943 Prox Keypad
EA9651-EN43The Scantronic 9651EN is a fully programmable, 8 zone security alarm panel designed to conform to PD6662:2004 Grade 2X system requirements.
The 9651EN is ideally suited to both home and small commercial security applications, combining maximum flexibility with ease of use to provide optimum security when and where you need it.
Simple A, B, C and D setting buttons let you to split the system into four areas, enabling you to set the whole, or just parts of the alarm protection.
Up to 4 attractive remote keypads can be added to any system. The 9943 keypad supplied (as pictured) uses a 4 or 6-digit PIN code to control system operation and the ability to use PROX fobs to set/unset the system.
A 9651 panel can be connected to any speech dialler or plug-by digital communicator via its integral communications output socket. Its three fully programmable outputs further enhance system flexibility. A 700 event log, fully date and time stamped to comply with the Association of British Insurers requirements, provides a complete record of system operation and service information.
Specifications
General |
|
Product name | 9651EN |
Security Grade | EN50131-1 or PD6662 Grade 2x |
Sales number | 09651EN-43 |
Capacities |
|
Max zones | 8 |
Zones - on board | 8 FSL or 8CC (with common tamper) |
Zones - on expander | None |
Standard wired outputs | 3 |
Communicator outputs: | 8 |
Setting Levels: | 1 Full + 3 Part (one partition) |
Partitions: | Four (no part setting partitions) |
Log capacity (events): | 700 |
No. Keypads | 4 |
Internal Clock | ±10 minutes over one year (depending on the accuracy of the mains supply frequency). |
Downloader | None |
Security |
|
Access code | 4 or 6 digits |
Number of user codes | 50 plus installer |
Code blocking | Blocked for 90s after 13 incorrect characters in series. |
Proximity tag differs | 4,294,967,296 |
Physical | |
End Station | |
End Station dimensions: | 235mm W, 245mm H, 90mm D |
End Station weight (w/o battery): | 3.3 kg |
Case material | Steel |
Keypad |
|
Keypad name | 9941/9943 |
Environmental |
|
Environmental Grade | Class II |
Operating temperature | -10° to +55°C |
Humidity | 96% RH |
Radio |
|
Expander/Built-in: | None |
Communications | |
Built in Communicator | No |
Plug on communicator | No |
Plug-by communicator | Provides 8 programmable outputs for plug-by module. |
Protocols: | Depends on communicator |
Power Supply |
|
EN50131-6 Type | |
Mains power supply | 230VAC +10%/-15%, 200mA max, 50/60Hz ±5% |
End station psu | 13.8VDC, 1.0A |
End station consumption | 130mA quiescent, 220mA active |
Keypad consumption (Backlight OFF) | 30mA |
Keypad consumption (Backlight ON) | 70mA |
Standby Battery | 12V rechargeable lead-acid, gel-type battery. |
Low battery voltage cutoff: | 10V |
Standby time: | Depends on battery |
Max recharge time: | Depends on battery |
Battery charge limit | 250mA |
12V Aux supply (inc LS) | 12VDC min, 13.8VDC max, ripple ±2% maximum, 500mA,. |
14V4 supply | None |
Monitoring includes | Mains fail, battery low voltage, battery failure. |
Outputs |
|
O/P 1 | Open-collector transistor outputs, 500mA, 12VDC, negative applied. |
O/P 2 | Open-collector transistor outputs, 500mA, 12VDC, negative applied. |
O/P 3 | Open-collector transistor outputs, 500mA, 12VDC, negative applied. |
O/P 4 | None |
O/P 5-8 | None |
LS (loudspeaker) | Supports two parallel-connected, externally mounted loudspeakers for internal sounder or EE tones: minimum speaker impedance 8Ω. |
Communication outputs | 12V logic outputs, negative applied in alarm (positive removed), 50mA maximum. |
ST (Siren test) | None |
Inputs |
|
TR | Tamper return for Bell |
Tellback/Remote reset** | Tellback/Remote reset**. +12V applied to operate reset. |
Line Fault input** | Line Fault input**. +12V applied to indicate line failure. |
Fuses |
|
Mains | The panel uses a T-250mA mains fuse. |
Other | The panel uses fast-acting polyswitch fuses for overcurrent protection: |
F1 – 12V AUX output | |
F2 – Battery output | |
F3 – Bus 1 |